PRocesses: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Dlls: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Popular: svchost.exe | csrss.exe | rthdcpl.exe | spoolsv.exe | mrt.exe | lsass.exe | Home | Manufacturers | Top 1000

dwm.exe

Problem with explorer.exe and dwm.exe in Windows 7 [closed]

I'm using Window 7 Ultimate. I get a problem with two processes, namely explorer.exe and sometimes dwm.exe.

The two processes tend to use cpu between 20-30%.

And it only occurs when i play some game on my PC. My PC works perfect until I play some game.

And another important observation:
They consume no cpu as such but only consumes when I try to refresh my desktop. I mean when I right-click on desktop. It takes seconds for refresh.

I have no virus problems.

I had already tried following things:


Kill explorer.exe and relaunch from task manager. (Problem still persists)
Kill dwm.exe, well it relaunches again. (Problem still persists)
Log Off and Log On. (Problem still persists)
Restart. Problem Solved. (But need an alternative).


Can anyone kindly suggest some quick fixes to the problem?

View Complete Forum Thread with Replies

Related posts for dwm.exe

See Related Forum Messages: Follow the Links Below to View Complete Thread

F12 not working in Delphi debugger on Windows 7/8
Is there anything to differentiate microsoft system processes running in a user's session wi…
Lost Windows 7 transparency DWM not working properly
Completely locking down Windows 7 using Python 3.2?
BitmapCache causes WPF application to lock up
Problem with explorer.exe and dwm.exe in Windows 7 [closed]
Dwm.exe memory leak when resizing simple WinForm application
How to get the second word on each line with regex?
Delphi 7 - Screenshot without capturing form - Windows 8 - DWM.exe
VB6 Drag and Drop Performance in Windows 8
Performance issue when resizing Win32 containing WPF

dwm.exe: F12 not working in Delphi debugger on Windows 7/8

Pressing F12 while the program is running in the debugger should break the execution and open the debugger. This works correctly on Windows XP (tested with D2007 and XE2) but fails on Windows 7 and 8 (also tested with D2007 and XE2; tested on three computers).

Registry is set up properly (Windows 7):


[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionAeDebug]
'UserDebuggerHotKey'=dword:00000000
'Debugger'=''C:Windowssystem32vsjitdebugger.exe' -p %ld -e %ld'

dwm.exe: Is there anything to differentiate microsoft system processes running in a user's session wi…

Just curious, say, if I enumerate all processes running in a user's session, is there any way to tell which are Windows system processes (such as explorer.exe, taskhost.exe, dwm.exe, etc.) and which are processes started by a user?

dwm.exe: Lost Windows 7 transparency DWM not working properly

After installing new theme from Microsoft (http://windows.microsoft.com/hr-HR/windows/downloads/snowflakes-and-frost-theme) my Windows 7 lost all its transparency (Aero) effects and placed Windows Basic as the actual theme.
I've been googling for my problem for an hour now and I have not found any solutions.
All my attempts to fix this issue have failed.


I've tried running the standard wizard for for fixing transparency problems and I got a response:
Desktop Window Manager i

dwm.exe: Completely locking down Windows 7 using Python 3.2?

This might be a more difficult question since I don't even know how to do it outside of Python...

I want to write a terminal program that completely locks up my PC until a password is entered. In the locked state no one should be able to do anything outside the terminal. In it, the user may rampage and write silly commands, but he should not be able to switch windows, click outside of it, open the task manager, open the menu with Ctrl + Alt Gr + Del and so on.

While searching for a

dwm.exe: BitmapCache causes WPF application to lock up

Here's the scenario:

1: Our WPF application starts

2: The WPF application loads various user controls, including some that use the new BitmapCache feature in WPF 4

3: Hit ctrl-alt-delete or win+l or load another application which requires UAC

4: Cancel that stuff

The WPF application is now unresponsive, however it's WPF itself which is the problem. All the application logic on all the background threads is fine, and you can interact with it by pressing alt+f4,

dwm.exe: Problem with explorer.exe and dwm.exe in Windows 7 [closed]

I'm using Window 7 Ultimate. I get a problem with two processes, namely explorer.exe and sometimes dwm.exe.

The two processes tend to use cpu between 20-30%.

And it only occurs when i play some game on my PC. My PC works perfect until I play some game.

And another important observation:
They consume no cpu as such but only consumes when I try to refresh my desktop. I mean when I right-click on desktop. It takes seconds for refresh.

I have no virus problems.

dwm.exe: Dwm.exe memory leak when resizing simple WinForm application

I created very simple Winform application in VS2010 (just a standard template File->New->Project->C# Windows Forms Application).

After several form resizes the system memory consumption can increase by 1Gb or more! And this memory is not returned to the system after application closing. Selecting Classic theme or killing dwm.exe helps to get memory back.

Here is the simple video I recorded to show the problem: http://youtu.be/ZJMCayflrHI

What can I do to get rid of this lea

dwm.exe: How to get the second word on each line with regex?

I have the following output (string variable) with process lists:

chrome.exe 1680 RDP-Tcp#0 1 104,552 K
chrome.exe 8944 RDP-Tcp#0 1 133,680 K
csrss.exe 8880 Console 19 3,796 K
winlogon.exe 6728 Console 19 4,484 K
LogonUI.exe 9024 Console 19 19,552 K
dwm.exe

dwm.exe: Delphi 7 - Screenshot without capturing form - Windows 8 - DWM.exe

Friends,

Need to screenshot of the all desktop WITHOUT MY FORM and load in TImage.
Success in Windows XP, 7 - with just ALPHABLEND = TRUE + SCREENSHOT PROCEDURE.

But same code does not work in Windows 8 - capture all screen INCLUDING THE FORM.

I know the problem is related to AERO - DWM.EXE - success using pssuspend.exe (sysinternals) - suspending winlogon.exe and killing dwm.exe

Someone could tell me how to capture all desktop without my form also in Windows 8?

dwm.exe: VB6 Drag and Drop Performance in Windows 8

I have a rather large VB6 application that features dragging and dropping controls between sub forms in an MDI application. The problem is the performance is really bad during the drag operation. You can see the element redrawing (slowly) as you drag it.

I first encountered this issue in Windows 7 and after some research concluded that it was a compatibility issue with the Aero interface. I was able to work around it by switching off the Aero effects. Now I am using Windows 8 the problem

dwm.exe: Performance issue when resizing Win32 containing WPF

I am in the process of migrating an existing legacy project. For now we want to use C++/CLI as a bridge between business logic (native C++) and interface (WPF). I followed this MSDN article on how to host WPF content in a Win32 window as a starting point. However, I cannot wrap my head around this problem: Whenever I resize the host window...


There are serious delays and the window is repainting slowly.
It causes the Desktop Window Manager (dwm.exe) to increase dramatically in mem

ielowutil.exe: IE Protected Mode + SSL Login = No cookie for non-SSL pages

(FWIW, I've posted this question to my blog as well: http://blog.wolffmyren.com/2011/07/11/ie-protected-mode-ssl/)

Does anyone know how to work around Internet Explorer Protected Mode limitations without requiring the end-user to add our site to the Trusted Sites list?

The problem is that if we enable SSL logins for our site, they can only access SSL pages. IE prevents our non-SSL served pages from accessing the cookie created during the SSL session, so we can either serve everythi

dllhost.exe: Debugging COM+ in Delphi 2009 : the dllhost.exe /ProcessID does not work

I am writing a COM+ component in Delphi 2009 on Windows 8. (I will move on to XE3 soon but for now it's D2009).

I have had quite a few IDE freezes when debugging regular simple forms applicaitions, mainly when closing the application after having stopped in a breakpoint and continued running the following code, but other than that D2009 works fine.

Now, the problem I have is that I am unable to debug the COM+ component. A new instance of this component is created from another forms

sync.exe: Windows Form Application Crashes Immediately

I have checked the CPU compile options and made sure Any CPU is set. Here is the log from the event viewer.

Application: QuickBooks-Sync.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ArgumentException
Stack:
at System.Data.EntityClient.EntityConnection.GetFactory(System.String)
at System.Data.EntityClient.EntityConnection.ChangeConnectionString(System.String)
at System.Data.Obj

win.exe: How can i run any win.exe from asp.net page?

How can i run any win.exe from asp.net page?

this codes me error: The system cannot find the file specified

System.Diagnostics.Process process1 = new System.Diagnostics.Process();

process1.StartInfo.WorkingDirectory = Request.MapPath(@'C:');

process1.StartInfo.FileName = Request.MapPath('WindowsApplication1.exe');
process1.Start();

vb6.exe: IProgressCallBack between VB6 EXE and VB.NET DLL

I am currently upgrading our software from VB6 to VB.NET and doing so one DLL at a time. The EXE will be last since it has a lot of third party UI controls.

One issue that I found is that the VB6 version of the DLL housed an IProgressCallBack id that was acting like an interface id (which does not officially exist in VB6) and allowed the EXE to get progress reports from the DLL and display it on the screen for the user.

When this DLL is migrated the IProgressCallBack id can be s

w3wp.exe: Periodic W3WP.exe crash

I have ASP.NET application. Periodicaly it is down and make my users unhappy.

In log I see:


Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7afa2
Faulting module name: nlssorting.dll, version: 4.0.30319.261, time stamp: 0x4ec9f3aa
Exception code: 0xc00000fd
Fault offset: 0x0000000000002296
Faulting process id: 0xfe4
Faulting application start time: 0x01cd23bb335b5514
Faulting application path: c:windowssystem32inetsrvw3wp.exe

ps2.exe: netty open 2 port server & 1 port client

I want open 2 port on server, 1 for production, 2 for monitoring and 1 client for telnet to another server. but my server always got notifcation 'to many open files' when run up to 1 day, my code like below :

ServerBootstrap bootstrap = new ServerBootstrap( new NioServerSocketChannelFactory(Executors.newCachedThreadPool(), Executors.newCachedThreadPool()));

private PipelineServer ps= new PipelineServer(listenMessage1);
bootstrap.setPipelineFactory(ps);

boo

ntvdm.exe: C# console applications all 16bit?

I was reading up about NTVDM.exe as I build a quick test console app and it crashed on a friends machine complaining about this EXE.

As I understand it all DOS cmd windows (C# console apps included) run as 16bit not 32bit.

Is this true? Does this mean all my works console app back office apps are running as 16bit rather than making the most of the 32bit available?

What about Windows services? As I believe we wrote it as a console app then made it run as a windows service?<

winword.exe: Close Winword.exe in my application depending on dialog box information

I have a third party software that starts a word process.

I have no problem finding the process with:

GetProcessesByName('WINWORD')


When the process starts a dialog box appears with different kind of informations for the user depending on if the word doc has a active macro, is write protected etc.

My question is: How can I access the header infomation of the dialog box so I can perform different actions according to the informations provided in the dialog box head

ravcpl64.exe: How to separate a executing path to file path and parameter?

There are such lines as

C:Program FilesRealtekAudioHDARAVCpl64.exe -s


in the registry key

HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun


Now I want to separate the absolute path and parameters from the line.

If the line is

C:Space DirDot.DirSample Name.Dot.exe param path.'C:Space DirDot.DirSample Name.Dot.exe'


Which separator should I use to deal with this line? Is there any Windows API function to solve this problem?

Disclaimer
This web site and all information written here is for information purposes only, WITHOUT ANY VARANTY. YOU ARE USING THIS PAGES ON YOU OWN RISK. You should always verify the accuracy of information provided on this page. We pay a big attention to provide you with the correct information. However, many spyware and malware programs use filenames of usual, non-malware processes and DLLs. If we have included information about dwm.exe that is inaccurate, we would appreciate your help by getting us know about your user review. Also, web links to software and DLL vendors are provided just for your conform, and we cannot guarantee its accuracy nor relevance with DLL or process listed on this page. We are not affiliated with this pages. We are not responsible for misprints on this site or changes occured since this page was published. The product, software and operating system names mentioned on this web site, can be copyrighted and registered trademarks of their owners.

dwm.exe