PRocesses: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Dlls: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Popular: svchost.exe | csrss.exe | rthdcpl.exe | spoolsv.exe | mrt.exe | lsass.exe | Home | Manufacturers | Top 1000

iexplore.exe

Process.Start(“IExplore.exe”); <— Is this reliable?

Process.Start('IExplore.exe');

Does this always work, on every machine ? If not, how to do it properly ?

... EDIT: .................................

The problem with Process.Start('http://www.example.com/'); is that we have to target a local html file, with some querystring specifying which page to load in the html frameset.
So our URL looks like the following:

G:PathToHelpFolderindex.html#search?page=1.html


If you pass this path to Process.Start, an error is generated: 'cannot find the file'. This is caused by the querystring at the end. (#search?page=1.html)

So, we have to start explorer (or default browser would be better) with the filepath as a command line argument. We found the method above at the MSDN documentation. (Process.Start('IExplore.exe');) Our only question is if this method is reliable enough to deploy to a commercial app. Mono isn't a problem, only windows systems are targeted.

... EDIT : Our solution ......

Our solution was to get the default browser from the registry, and start that with the filename as argument. (as stated in: http://stackoverflow.com/questions/2646825/launching-default-browser-with-html-from-file-then-jump-to-specific-anchor/2646944#2646944)

View Complete Forum Thread with Replies

Related posts for iexplore.exe

See Related Forum Messages: Follow the Links Below to View Complete Thread

How can I find programatically where iexplore.exe is?
Strange ProcessorAffinity issue with IEXPLORE.exe
iexplore.exe process opens but I can't see it
Batch file to terminate all instances of IExplore.exe
Debugging SHDocVw.InternetExplorer.Quit not closing iexplore.exe process
Process.Start(“IExplore.exe”); <— Is this reliable?
VS2010 and IE10 Attaching the Script debugger to process iexplore.exe failed
How to capture keystrokes of iexplore.exe only?
Process.Start(“IEXPLORE.EXE”) immediately fires the Exited event after launch.. why?
Unhandled exception at 0x75619617 (KernelBase.dll) in iexplore.exe
Process.Kill does not seem to work with iexplore.exe
invoke iexplore.exe in already launched instance using ShellExecuteEx
Run iexplore.exe invisibly
Attaching the Script debugger to process '[XXXX] IEXPLORE.EXE' on machine 'NAME' failed
Can I pass the -f parameter to iexplore.exe when using Watir?

iexplore.exe: How can I find programatically where iexplore.exe is?

I need to run myApp.exe that in turn will launch iexplore.exe.
What is the most robust, generic way (OS bit version agnostic) to do so?

Can you point me to the right registry key /env var/other mean to do so?

Thanks,
Guy

iexplore.exe: Strange ProcessorAffinity issue with IEXPLORE.exe

I need to launch IE and set the affinity to a particular single CPU.
When running the following c# code, as expected notepad.exe is started and has it's affinity set to just cpu2, strangely iexplore.exe is started with its affinity set to just cpu0. No matter what I set ProcessorAffinity to iexplore.exe always goes to cpu0.

I have tested this on 4 core xp 32 bit and 4 core 2008 64 bit, both IE8.

using System;
using System.Diagnostics;
public id Launch
{

publ

iexplore.exe: iexplore.exe process opens but I can't see it

I have a strange issue with opening IE (8), on Server 2008 R2, I execute the process (try to open a web-site in a browser) and I can see it in the Task Manager, but it's not visible on the Taskbar or anywhere on the desktop.
It is especially annoying since I use this server for developing a website.

It is the same if I open several IE processes, they are running (as seen in the taskbar) but are not visible.

After Restart of the server is usually works for a while till it starts

iexplore.exe: Batch file to terminate all instances of IExplore.exe

Sometimes IE freezes up and I have to open the Task Manager, right click the process and choose End Process to get it to really close.

If I have a lot open, I have to find the right one to end. I want a batch file command I can run to just terminate them all.

I tried using taskkill as described here, but that does not terminate a frozen IE like the 'End Process' button does.

iexplore.exe: Debugging SHDocVw.InternetExplorer.Quit not closing iexplore.exe process

I think there's no definite answer so how would you approach debugging this problem?:

My main app (a MicroStation plugin) launces IE using the SHDocVw.InternetExplorer COM wrapper, interacts with it, hides it when it is not used (e.g. intercepts when the user closes the window and sets InternetExplorer.Visible to false).

When the main app is closed the plugin closes IE by calling InternetExplorer.Quit but the iexplore process is left running (the IE is hidden at the moment the ma

iexplore.exe: Process.Start(“IExplore.exe”); <— Is this reliable?

Process.Start('IExplore.exe');

Does this always work, on every machine ? If not, how to do it properly ?

... EDIT: .................................

The problem with Process.Start('http://www.example.com/'); is that we have to target a local html file, with some querystring specifying which page to load in the html frameset.
So our URL looks like the following:

G:PathToHelpFolderindex.html#search?page=1.html


If you pass this path to Process.Start, an er

iexplore.exe: VS2010 and IE10 Attaching the Script debugger to process iexplore.exe failed

So I am using Win7 x64 with VS2010 and have installed the IE10 Win7 Preview and ReSharper 6.1.

When I attempt to Start Debugging, I receive the following:


'Attaching the Script debugger to process '[1111] iexplore.exe' on
machine 'MINE' failed. A debugger is already attached.'


I can click OK and look at attached debug sessions - [1111] is grayed out and there is another instance of iexplore.exe with my solution title. I can attach manually and it works fin

iexplore.exe: How to capture keystrokes of iexplore.exe only?

My goal is to capture keystrokes of the user when he is interacting with Internet Explorer (iexplore.exe).

This is my DLL code for a DLL called hook.dll.

#include <iostream>
#include <windows.h>

extern 'C' __declspec(dllexport)
LRESULT keyboardHook(int nCode, WPARAM wParam, LPARAM lParam)
{
if (nCode >= 0) {
std::cout << 'nCode: ' << nCode << '; wParam: ' << wParam
<<' (' << ch

iexplore.exe: Process.Start(“IEXPLORE.EXE”) immediately fires the Exited event after launch.. why?

i have a strange problem with IE8 installed in xp. i was trying to launch IE using an System.Diagnostics.Process.Start method in c#. And i have a requirement to trap the exited event of the IE and do some operation. But i ended up in a rather strange problem where the IE immediately fires the exited event after launch.

this is the sample code

Process objProcess = Process.Start('IEXPLORE.EXE', 'http://google.com');

if (objProcess != null)
{
objProc

iexplore.exe: Unhandled exception at 0x75619617 (KernelBase.dll) in iexplore.exe

I'm making a firebreath based plugin which adds two integers.
I'm debugging the plugin by attaching the source to the browser. I'm getting the above exception at this step of my PLUGINAPI.cpp
I have created and built the dll of the wrapper and the c# id libraries. it's working..added the project references of these to my firebreath api project.
In PLUGINAPI project>>

int PLUGINAPI::PerformAddition(int a, int b)
{
IWrapIt *wrapIt=IWrapIt::CreateInstance();
HWND ha

iexplore.exe: Process.Kill does not seem to work with iexplore.exe

I am using watin for browser automation, and many browser windows get left open, and at the end I am using this to attempt to close them all:

Process[] ieProcesses = Process.GetProcessesByName('iexplore');

foreach (Process ie in ieProcesses)
{
ie.CloseMainWindow();
ie.Close();
ie.Dispose();
}


For some reason close, closemainwindow, and dispose, all will not close my

iexplore.exe: invoke iexplore.exe in already launched instance using ShellExecuteEx

I used ShellExecuteEx to call iexplore.exe, Whenever I start the application a new instance of internet explorer is created irrespective of, internet explorer already opened or not.

I want to change this, if already an instance of the Internet explorer is there, I need to open a new tab in that instance with the address I am passing to the ShExecInfo.lpParameters, thus without creating a new window. Is there a way to do this? Please advice..

UPADATE:
In the below answer I have a

iexplore.exe: Run iexplore.exe invisibly

I am trying to run iexplore.exe invisibly. This works but it shows the internet explorer window.

@Start iexplore www.google.com


Than I tried it with /d

@Start /d iexplore www.google.com


But I'm getting 'The current directory is invalid' error. What is the correct way to run iexplore via bat file invisibly ?

iexplore.exe: Attaching the Script debugger to process '[XXXX] IEXPLORE.EXE' on machine 'NAME' failed

Few days ago I started getting the following error when I try to run/debug my web application using F5 in Visual Studio 2008:

Attaching the Script debugger to process '[XXXX] IEXPLORE.EXE' on machine 'NAME' failed. The process does not have sufficient privileges to be debugged.

I am using Visual Studio 2008, IE8 and Visual Studio Development Server(as my web server)

I did look around and couldn't find much on the web!!

iexplore.exe: Can I pass the -f parameter to iexplore.exe when using Watir?

I need to run several instances of a Ruby script that's using the Watir gem, and they all need to be able to run in IE fullscreen mode.

CLARIFICATION: They need to be able to open IE in a mode that allows multiple instances of IE to operate in full screen mode, not necessarily trigger the fullscreen. Opening up IE normally allows only a single instance to open fullscreen (not maximized).

I can make this happen manually, by specifying the '-f' parameter on iexplore.exe. Is there

cli.exe: incr not working properly in redis + node.js

i have one set named 'UserActivity:[id]

when i am updating it within script using node.js it is not incremented.
below is the my code.

// redisCli.incr('UserActivity:' + Id, function (err, Ctr) {
redisCli.incrby('UserActivity:' + Id, 1, function (err, Ctr) {
console.log(Ctr); //this is always return '1'
//when i have checked it using redis-cli.exe
//get 'UserActivity:Id -> '1'
});

//in above case id value is 1

java.exe: Include java.exe in the runtime built

To create a installer for my javafx application, I have followed tutorial . And it as expected makes the installer.

The directory structure it makes is this:


MyApp

+app

+runtime

+MyApp.exe

+MyApp.ico



The runtime contains the Java runtime. But the issue is, my application creates some Java process and it needs the path of the java.exe. But on browsing through the above folder runtime, it does not contain java.exe.

i.e.

svchost.exe: How to hide svchost.exe (dos prompt) when executing a scheduled task in Windows

I created a java program that will pop up a dialog, and scheduled it as a task. Everything works fine except when the scheduled java program runs and the dialog pops up, there is another window (svchost.exe) hanging behind the dialog box and doesn't go anywhere until the java program finishes its execution. The program is running in Windows XP.

How can I avoid that dos prompt?

Thanks

win.exe: WampServer: php-win.exe The program can't start because MSVCR110.dll is missing

if I try to install WampServer the above error appears. I already tried to install all the programs which were recommended, for example here:
WAMP shows error 'MSVCR100.dll' is missing when install

But nothing helps. What can I do to install WampServer?

defrag.exe: Real Time CMD Output on Windows Defrag.exe

I am trying to capture the output on CMD on REAL TIME. I want to read every line that's being output. The following is my code:

private void Defrag2()
{
string osDrive = Path.GetPathRoot(Environment.SystemDirectory);
Process Psi = new Process();
System.Text.Encoding SysEncoding = System.Text.Encoding.GetEncoding(System.Globalization.CultureInfo.CurrentUICulture.TextInfo.OEMCodePage);
Psi.StartInfo = new ProcessStartInfo('cmd', @'/c defrag

winword.exe: ASP.net C# - WINWORD.exe

I am playing with Microsoft word document from ASP.NET/C# program.

My programs opens up word docs internally. using

app = new Word.Application();
app.Documents.Open

it creates a instance of winword.exe process, I can see it in Task Manager.

even if I closes Doc using close() and app.quit(). it should kill the process. but this process doesnt get killed.

any idea how to kill this process programmatically.

opera.exe: Is it possible to start Opera in Kiosk Mode without command line switches?

I'm trying to setup Opera to run in Kiosk Mode without using any command line switches on Windows XP.

Originally I had it working by using a desktop shortcut with about 5 or 6 command line switches tagged on the end of the path to the opera.exe such as: 'C:Program FilesOperaopera.exe' -kioskmode -kioskresetstation -nocontextmenu -nodownload -nokeys etc...

However, the kiosk system that it will be running on cannot startup and monitor Opera at all when there are additional command l

taskmgr.exe: How to #define hard coded strings when L prefix (Visual C++ compiler) is used?

How to #define the path L'C:WindowsSystem32 askmgr.exe' for handling wide char

#define TASK_MGR 'C:\Windows\System32\taskmgr.exe'

KillProcess(TASK_MGR); //this works

HINSTANCE resurrect = ShellExecute(NULL, L'open', L'C:\Windows\System32\taskmgr.exe', NULL, NULL, SW_MINIMIZE);

services.exe: How to read a REG Value into an Environment Variable

I am trying to read a REG Value into an Environment Variable in a BAT file. E.g.,

REG HKLMSYSTEMCurrentControlSetServicesEventlog /v ImagePath

I can get the entire output string of the REG command into an environment variable like this:

FOR /F 'usebackq delims==' %%a in (`REG QUERY 'HKLMSYSTEMCurrentControlSetServicesEventlog' /v ImagePath`) DO set ImagePath=%%a


However, this sets the environment variable to the entire line, i.e.,

ImagePath REG_EXPAND_SZ

winlogon.exe: obtain session id and process id for winlogon.exe

I'm trying to create a process that starts up an application that requires a UI. So it can't be in session 0.
My idea was to obtain the process id of winlogon.exe of the current logged on user. In this way I could duplicate the winlogon token and run my application using the CreateProcessAsUser function.
my code so far:(this is being called when the application i want run is required)

#include <windows.h>
#include <tlhelp32.h>
#include <tchar.h>

this

See this page in: English Espanol

Disclaimer
This web site and all information written here is for information purposes only, WITHOUT ANY VARANTY. YOU ARE USING THIS PAGES ON YOU OWN RISK. You should always verify the accuracy of information provided on this page. We pay a big attention to provide you with the correct information. However, many spyware and malware programs use filenames of usual, non-malware processes and DLLs. If we have included information about iexplore.exe that is inaccurate, we would appreciate your help by getting us know about your user review. Also, web links to software and DLL vendors are provided just for your conform, and we cannot guarantee its accuracy nor relevance with DLL or process listed on this page. We are not affiliated with this pages. We are not responsible for misprints on this site or changes occured since this page was published. The product, software and operating system names mentioned on this web site, can be copyrighted and registered trademarks of their owners.

iexplore.exe